Products

M/s. Elite Laminates Pvt. Ltd. Manufactures the following products:
  • - Decorative Laminates
  • - Compact Laminates
  • - Backing White Liner Laminates
  • - Metallic Laminates
  • - Marker Grade Laminates
  • - Chalk Board Grade Laminates
  • - Uni core / color core Laminates
  • - High Glossy Laminates

Specifications

Thickness : We manufacture High Pressure Decorative Laminates from 0.45mm to 35mm thickness.
Sizes : 1220 MM X 2440 MM / 1300 MM X 3050 MM / 1300 MM X 2800 MM
Finishes : Chiffon Suede, Glossy, SF- Suede Finish, Silk Matt, Veneer finish textures, Fancy textures, Stone finish, Fabric finish etc.
Designs : As per our Catalogue

Technical Specification 0.8 Mm (Vertical General Purpose Standard)

Sl.No Protocol IS 2046:1995 Typical Values Standard Requirement
Technical Specification Unit
1 Appearance & Surface Defects Surface free from Spots, dirt, hair & edge defects.
2 Dimensional Properties - - -
Length mm Conforms IS 2046 + / - 10 MM
Width mm Conforms IS 2046 + / - 10 MM
Thickness mm Conforms IS 2046 Variation ±0.10
Flatness mm Conforms IS 2046 120 max
Straigthness of edges mm/metre straight edge Conforms IS 2046 1.5 max
Squareness mm/metre straight edge Conforms IS 2046 1.5 max
3 Resistance of Surface Wear Revolutions 150 150
4 Resistance to immersion in boiling water %increase by thickness Conforms IS 2046 14.0 max
%increase by weight Conforms IS 2046 12.0 max
Appearance Conforms IS 2046 Not worse than Index-4
5 Resistance to Staining Groups 3 & 4 Conforms IS 2046 Not worse than Index-4
Groups 1 & 2 Conforms IS 2046 Not worse than Index-4
6 Resistance to Scratching Load(N) ≥ 1.75 ≥ 1.75
7 Resistance to Steam Grade Conforms IS 2046 Not worse than Index-4
8 Resistance to Cracking Grade Conforms IS 2046 Not worse than Index-4
9 Resistance to Impact by small ball Spring Force(N) ≥ 20 ≥ 20
Care and Maintenance: Elite Lam recommends that the decorative surfaces may be cleaned with warm water and mild soaps, such as those used for hands. We do not recommend the use of cleaners, which may contain abrasives, acids or alkalis; they will damage the decorative surface.

Technical Specification 1.0 Mm (Horizontal General Purpose Standard)

Sl.No Protocol IS 2046:1995 Typical Values Standard Requirement
Technical Specification Unit
1 Appearance & Surface Defects Surface free from Spots, dirt, hair & edge defects.
2 Dimensional Properties - - -
Length mm Conforms IS 2046 + / - 10 MM
Width mm Conforms IS 2046 + / - 10 MM
Thickness mm Conforms IS 2046 Variation ±0.10
Flatness mm Conforms IS 2046 120 max
Straigthness of edges mm/metre straight edge Conforms IS 2046 1.5 max
Squareness mm/metre straight edge Conforms IS 2046 1.5 max
3 Resistance of Surface Wear Revolutions ≥350 350
4 Resistance to immersion in boiling water %increase by thickness Conforms IS 2046 12.0 max
%increase by weight Conforms IS 2046 10.0 max
Appearance Conforms IS 2046 Not worse than Index-4
5 Resistance to Staining Groups 3 & 4 Conforms IS 2046 Not worse than Index-4
Groups 1 & 2 Conforms IS 2046 Not worse than Index-4
6 Resistance to Dry Heat @ 180°C

Appearance Suede/Matt

 Conforms IS 2046 Not worse than Index-4
Appearance Gloss Conforms IS 2046 Not worse than Index-3
7 Resistance to Cigarette Burns Appearance Conforms IS 2046 Not worse than Index-3
8 Resistance to Scratching Load(N) ≥ 20 ≥ 20
9 Resistance to Steam

Grade

 Conforms IS 2046 Not worse than Index-4
10 Resistance to Cracking

Grade

 Conforms IS 2046 Not worse than Index-4
11 Resistance to Impact by small ball Spring Force(N) ≥ 20 ≥ 20
Care and Maintenance: Elite Lam recommends that the decorative surfaces may be cleaned with warm water and mild soaps, such as those used for hands. We do not recommend the use of cleaners, which may contain abrasives, acids or alkalis; they will damage the decorative surface.